Tutorials

You can find instructions and tutorial of how to use CNC machines in this section.

FAQs for CNC beginners

If you are new to CNC, you may have some questions and problems during operating the CNC. This article provides some instructions for CNC beginners. Q1: The USB drive is corrupted and has no files in it. How can I get the files and documents?. Please

How to install NEMA23 stepper motors on Masuter 3

This video shows the steps of upgrading the Masuter 3 CNC machine with NEMA23 stepper motors.

XE-PRO linear rails upgrade kit debugging guide

When upgrading the XE-PRO with linear rails, we need to do some debugging to make sure everything is installed in right position; otherwise, there may be noise when the machine is running, and this may affect the engraving accuracy. This video shows

How to change Grbl settings for Masuter 3S 8040

1.Connect the machine to computer. 2.Open the LaserGRBL, connect the machine. Click path: Grbl -> Grbl Configuration. 3.Click “Import”, select the Masuter 3S 8040 configuration document, it will be imported to lasergrbl. Message will show as picture-

How to change Grbl settings for Masuter 3 4080

1.Connect the machine to computer. 2.Open the LaserGRBL, connect the machine. Click path: Grbl -> Grbl Configuration. 3.Click “Import”, select the Masuter 3 4080 configuration document, it will be imported to lasergrbl. Message will show as picture-3

How to change Grbl settings for XE-PRO 8040

1.Connect the machine to computer. 2.Open the LaserGRBL, connect the machine. Click path: Grbl -> Grbl Configuration. 3.Click “Import”, select the XE-PRO 8040 configuration document, it will be imported to laserGrbl. Message will show as picture-3. C

How to change Grbl settings for Masuter Pro 4080

1.Connect the machine to computer. 2.Open the LaserGRBL, connect the machine. Click path: Grbl -> Grbl Configuration. 3.Click “Import”, select the Masuter Pro 4080 configuration document, it will be imported to lasergrbl. Message will show as picture

How to connect CNC machine to computer

In order to control the CNC machine in the computer, a CH340 driver must be installed in the computer first. Step 1: download the CH340 driver from the thumb drive included in the package or from the below link:. https://foxalien.gorgias.help/en-US/c

How to replace belts on Masuter Pro

This tutorial shows how to install the belt on FoxAlien Masuter Pro. The installation is similar on 4040-XE, Masuter 4040, Masuter 3 and Masuter 3S. PDF download:.