1. General Safety Instructions. - Read the Manual: Before operating the CNC machine, thoroughly read and understand the user manual provided by the manufacturer. - Training: Only trained and authorized personnel should operate the machine. Ensure all

1. General Safety Instructions&#xA0; - Read the Manual: Before operating the CNC machine, thoroughly read and understand the user manual provided by the manufacturer.&#xA0; &#xA0;- Training: Only trained and authorized personnel should operate the machine. Ensure all operators are familiar with its functions and safety features.&#xA0; &#xA0;- Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and hearing protection. Avoid loose clothing or jewelry that could get caught in the machine.&#xA0; &#xA0;- Work Area: Keep the work area clean, organized, and free of obstacles. Ensure proper lighting and ventilation.&#xA0;2. Machine Setup and Inspection&#xA0; &#xA0;- Power Supply: Ensure the machine is connected to a stable power supply with the correct voltage and grounding. Avoid using extension cords.&#xA0; &#xA0;- Inspection: Before each use, inspect the machine for any visible damage, loose parts, or worn components. Do not operate the machine if any issues are detected.&#xA0; &#xA0;- Tooling: Use only approved cutting tools and ensure they are properly installed and secured. Check for tool wear or damage before starting.&#xA0; &#xA0;- Material Securement: Properly secure the workpiece using clamps or a vacuum table to prevent movement during operation.&#xA0;3. Operating Procedures&#xA0; &#xA0;- Startup: Power on the machine and perform a test run without cutting to ensure all components are functioning correctly.&#xA0; &#xA0;- Software Setup: Load the correct design file and verify the cutting parameters (e.g., speed, depth, and tool path) before starting the job.&#xA0; &#xA0;- Monitoring: Never leave the machine unattended while it is running. Continuously monitor the operation for any unusual noises, vibrations, or errors.&#xA0; &#xA0;- Emergency Stop: Familiarize yourself with the location and operation of the emergency stop button. Use it immediately if any unsafe condition arises.&#xA0;4. Maintenance and Cleaning&#xA0; &#xA0;- Regular Maintenance: Follow the manufacturer&#x2019;s maintenance schedule to keep the machine in optimal condition. This includes lubricating moving parts, checking alignment, and replacing worn components.&#xA0; &#xA0;- Cleaning: Clean the machine and work area after each use. Remove dust, debris, and cutting residues to prevent buildup and potential hazards.&#xA0; &#xA0;- Inspection Log: Maintain a log of inspections, maintenance, and repairs for reference.&#xA0;5. Hazard Prevention&#xA0; &#xA0;- Fire Safety: Keep flammable materials away from the machine. Have a fire extinguisher nearby and ensure operators know how to use it.&#xA0; &#xA0;- Dust and Fumes: Use a dust collection system or vacuum to remove particles generated during cutting. If working with materials that produce harmful fumes, ensure proper ventilation or use a respirator.&#xA0; &#xA0;- Sharp Tools: Handle cutting tools with care to avoid injury. Always use tools designed for the specific material being processed.&#xA0;6. Emergency Procedures&#xA0; &#xA0;- Power Failure: In case of a power outage, turn off the machine and wait for power to be restored before resuming operation.&#xA0; &#xA0;- Malfunction: If the machine malfunctions or behaves unexpectedly, stop the operation immediately and contact technical support.&#xA0;7. Additional Tips&#xA0; &#xA0;- Material Compatibility: Ensure the material being processed is suitable for the machine and cutting tools. Avoid materials that may cause excessive wear or damage.&#xA0; &#xA0;- Software Updates: Keep the machine&#x2019;s software and firmware up to date to benefit from the latest features and safety improvements.&#xA0; &#xA0;- Operator Fatigue: Avoid operating the machine when fatigued or under the influence of medication or substances that may impair judgment. Contact us at <a href="mailto:support@foxalien.com">support@foxalien.com</a> for any questions.

Things to know before operating a CNC machine

Proper maintenance is essential to ensure the longevity, precision, and safety of your CNC router machine. Follow this guide to keep your machine in optimal condition. - Daily Maintenance. 1. Clean After Each Use. 2. Check for Loose Parts. 3. Lubrica

Proper maintenance is essential to ensure the longevity, precision, and safety of your CNC router machine. Follow this guide to keep your machine in optimal condition.- Daily Maintenance1. Clean After Each Use<ul><li>Use a soft brush or compressed air to remove dust, debris, and chips from the machine&#x2019;s work area, rails, spindle, and tool holder. &#xA0;</li><li>Wipe down surfaces with a microfiber cloth slightly dampened with isopropyl alcohol (avoid excess moisture). &#xA0;</li></ul>2. Check for Loose Parts<ul><li>Inspect screws, belts, and clamps for tightness. Tighten any loose components to prevent vibrations during operation. &#xA0;</li></ul>3. Lubrication<ul><li>Apply a small amount of machine oil or grease to linear rails, lead screws, and bearings as specified in the user manual. Avoid over-lubrication to prevent dust buildup. &#xA0;</li></ul>4. Tool Inspection<ul><li>Examine cutting bits for wear, chips, or dullness. Replace damaged tools immediately to maintain cutting quality. &#xA0;</li></ul> - Weekly/Monthly Maintenance1. Deep Cleaning<ul><li>Disassemble removable parts (e.g., collets, clamps) and clean them thoroughly. &#xA0;</li><li>Remove built-up residue from the spindle using a specialized spindle cleaner. &#xA0;</li></ul>2. Calibration Check<ul><li>Verify machine alignment and axis calibration using a dial indicator or calibration software. &#xA0;</li><li>Re-level the machine if it has been moved or shows signs of misalignment. &#xA0;</li></ul>3. Belt and Motor Inspection<ul><li>Check belts for fraying, cracks, or slack. Adjust tension or replace worn belts. &#xA0;</li><li>Ensure stepper motors are free of debris and operating smoothly. &#xA0;</li></ul>4. Electrical Components<ul><li>Inspect wiring and connections for damage or corrosion. &#xA0;</li><li>Clean ventilation fans to prevent overheating. &#xA0;</li></ul> - Backup Settings<ul><li>Save your machine&#x2019;s configuration files and custom tool libraries to avoid data loss. &#xA0;</li></ul> - Long-Term Storage<ul><li>Clean and lubricate all metal parts to prevent rust. &#xA0;</li><li>Store the machine in a dry, dust-free environment with a protective cover. &#xA0;</li><li>Remove cutting tools and store them in a labeled case. &#xA0;</li></ul> - Safety Tips<ul><li>Always power off and unplug the machine before maintenance. &#xA0;</li><li>Wear safety goggles and gloves when handling sharp tools or cleaning debris. &#xA0;</li><li>Avoid using the machine in humid or extreme-temperature environments. &#xA0;</li></ul> By following this guide, you&#x2019;ll maximize your CNC router machine&#x2019;s lifespan and maintain its accuracy. Always refer to the manufacturer&#x2019;s manual for model-specific instructions. Happy crafting! &#x1F6E0;&#xFE0F; &#xA0;Contact us at <a href="mailto:support@foxalien.com">support@foxalien.com</a> for any questions.

How to maintain a CNC machine

We have different series of CNC machines that can make guitar. This article will list out the features and other recommended accessories for guitar building. 1. Masuter Pro: pulley system with rubber wheels, NEMA 17 stepper motors. Cons: the stepper

We have different series of CNC machines that can make guitar. This article will list out the features and other recommended accessories for guitar building. 1.&#xA0;Masuter Pro: pulley system with rubber wheels, NEMA 17 stepper motors.<ul><li style="font-size: 16px;">supports extension kit</li><li style="font-size: 16px;">supports to install trimmer router &amp; laser</li></ul>Cons: the stepper motors may not be stronger enough for long time cutting and carving. And the engraving speed cannot be set to too fast in case of loosing step.<a href="https://www.foxalien.com/products/cnc-router-masuter-pro-with-4080-extension-bundle-kit" rel="noreferrer noopener" style=" text-decoration: none !important;" target="_blank">CNC Router Masuter Pro with 4080 Extension Bundle Kit</a><a href="https://www.foxalien.com/products/foxalien-fa710-trimmer-router?variant=42367424397449" rel="noreferrer noopener" style=" text-decoration: none !important;" target="_blank">FoxAlien FA710 Trimmer Router-US</a> 2. Masuter 3: pulley system with metal wheels, NEMA 17 stepper motors.<ul><li style="font-size: 16px;">supports extension kit (coming soon)</li><li style="font-size: 16px;">supports NEMA23 stepper motor upgrade kit (coming soon)</li><li style="font-size: 16px;">supports trimmer router &amp; laser</li></ul>Cons: the original stepper motors may not be stronger enough for long time cutting and carving. And the engraving speed cannot be set to too fast in case of loosing step. You may need several upgrade kits to make it a perfect and efficient machine for guitar building.<a href="https://www.foxalien.com/collections/masuter-3" rel="noopener noreferrer" target="_blank">Masuter 3 CNC machine</a><a href="https://www.foxalien.com/collections/cnc-accessories/products/foxalien-fa710-trimmer-router" rel="noopener noreferrer" target="_blank">FoxAlien FA710 Trimmer Router</a> 3. XE-PRO: pulley system with metal wheels, NEMA 23 closed-loop stepper motors, which have stronger torque and faster moving speed.<ul><li style="font-size: 16px;">supports extension kit (this extension kit will come with pre-install linear rails on X-axis)</li><li style="font-size: 16px;">supports to install trimmer router &amp; laser</li><li style="font-size: 16px;">supports linear rails upgrade kit (will take the engraving accuracy to next level)</li><li style="font-size: 16px;">Z travel (95mm), is taller than Masuter Pro.</li></ul><a href="https://www.foxalien.com/products/cnc-router-machine-xe-pro-with-8040-extension-bundle-kit" rel="noreferrer noopener" style=" text-decoration: none !important;" target="_blank">CNC Router Machine XE-PRO with 8040 Extension Bundle Kit</a><a href="https://www.foxalien.com/products/linear-rails-upgrade-kit-for-cnc-machine-xe-pro" rel="noreferrer noopener" style=" text-decoration: none !important;" target="_blank">Linear Rails Upgrade Kit for CNC Machine XE-PRO</a><a href="https://www.foxalien.com/products/foxalien-fa710-trimmer-router?variant=42367424397449" rel="noreferrer noopener" style=" text-decoration: none !important;" target="_blank">FoxAlien FA710 Trimmer Router-US</a> 4. Vasto series: equipped with linear rails and ball screws on XYZ axis. 3 different working area options. Vasto XXL is the largest size in this series. With this series, basically you don&apos;t need to other upgrade kits.It supports all FoxAlien laser kits and trimmer router.<a href="https://www.foxalien.com/collections/vasto-series" rel="noopener noreferrer" target="_blank">FoxAlien Vasto Series</a><a href="https://www.foxalien.com/products/foxalien-fa710-trimmer-router?variant=42367424397449" rel="noreferrer noopener" style=" text-decoration: none !important;" target="_blank">FoxAlien FA710 Trimmer Router-US</a>

Buying guide for guitar building

Grbl error codes list

The tutorial video is made by James Dean Designs. This video shows how to create a spoilboard on the FoxAlien Masuter Pro and the process of tramming your spindle in to get great results.

The tutorial video is made by James Dean Designs.This video shows how to create a spoilboard on the FoxAlien Masuter Pro and the process of tramming your spindle in to get great results. <iframe height="315" width="560" title="YouTube video player" src="https://www.youtube.com/embed/s7lfLUsz6-M" frameborder="0" allowfullscreen></iframe>

Making a spoilboard and tramming your spindle with Masuter Pro

FoxAlien

FoxAlien provides more CNC engraving related guides.

More Guides

CH340 driver & Gbrl software

Flash drive documents

Default Grbl settings

Download

Recommended CNC parameters for different materials

Laser engraving settings for different material

Tool database for FoxAlien bits in Fusion360

MDF spoilboard schematics files download

Resources

How to replace Masuter Pro control board

Control board issue

XE-PRO Stepper motors run in wrong direction

Stepper motor can't move

Stepper motor issue

No power to start the machine - Masuter Pro, Masuter 3

Power issue

Trouble Shooting

FAQs for CNC beginners

How to install NEMA23 stepper motors on Masuter 3

XE-PRO linear rails upgrade kit debugging guide

How to change Grbl settings for Masuter 3S 8040

How to change Grbl settings for Masuter 3 4080

How to change Grbl settings for XE-PRO 8040

How to change Grbl settings for Masuter Pro 4080

How to connect CNC machine to computer

How to replace belts on Masuter Pro

Tutorials

How can I ensure I am purchasing the right unit for my project needs?

Can I order a replacement part, like a stepper motor or a spindle clamp, for my machine from FoxAlien?

What lubricant should be used on FoxAlien machines, and is WD-40 suitable?

What should I do if my CNC machine is not connecting properly to the computer software?

What are the recommended tool specifications for the default bit that comes with the FoxAlien Masuter Pro?

Others